Posts tagged: COB LED strip light

How many LEDs are in a COB LED Strip Light?

How many beads do LED lights have in general?  

Mainly about the traditional lamp belt, the number of commonly used lamp beads are: 60 beads/meters, beads/meters, beads/meters, beads/meters!  

The more beads, the closer the arrangement between the beads, the brighter the lamp belt.  

If your home lamp belt is hidden installation, you can choose less beads, if it is an open lamp belt, it is recommended to use the lamp groove, and choose at least one meter of light, so that the light effect will be more ideal. And the lamp belt also has single row, double row of points.  

Led soft light bar Specifications Difference between LED soft light bar and LED hard light bar

Led soft strip is a relatively advanced lighting lighting in the lighting industry at present. Led soft strip is mainly based on the flexible circuit board made of polyimide PI substrate as the carrier, and is installed into the high-brightness LED emitter chip through series and parallel circuit design, and then connected to the power supply to control the lighting effect. And LED soft light strip is also a kind of LED lamp belt. Led soft strip his characteristics are also very obvious, such as flexible circuit board, good stability, very low power consumption, høj effektivitet, and the length can also be controlled by itself. So LED soft strip is widely used in many industries.  

Led soft strip specifications

According to the luminous color, there are often monochrome bright light belt, monochrome dark light belt, three-color light belt, colorful light belt;  

Ifølge størrelsesspecifikationerne er ofte *, *, *8mm, *7mm, *6mm, *5mm, *8mm, *6mm, *5mm, *4mm og andre typer;  

I henhold til den overordnede emballageklassificering: vandtæt type, bar type;  

Ifølge kredsløbsoverfladeprocesklassificeringen: OSP oxidationsmodstandstype, guldvask procestype;  

Ifølge kredsløbet anden proces klassificering: stor områdefølsom hvid olietype, stort område varm fast hvid olie type, stor arealfølsom sort olietype, stort område varm solid sort olie type.  

FlexLightBar. Dette er det engelske navn på LED soft light strip, hvilket betyder fleksibel lysstribe. Og kinesisk LED-blød lysstrimmel er den samme ting, men navnet er anderledes.  

Led soft strip pris

Ofte med det fleksible printkort lavet af polyimid PI-substrat som bærer, through the series and parallel circuit design of high brightness LED luminescent chip, with the connection of power supply and light emitting program controller to achieve a variety of dazzling lighting effects of LED lamp belt, called LED soft strip.  

Thermal conductivity double-sided tape LED light strip: ￥11/ m (price source network, for reference only)  

One meter 54 lamp RGB full color running horse: ￥47/ m (price source network, for reference only)  

Patch LED soft strip: ￥22/ meter (price source network, for reference only)  

Drip sleeve LED soft light bar: ￥14.6/ m (price source network, for reference only)  

Shenzhen spot hot soft light bar: ￥8/ m (price source network, for reference only)  

LED soft light strip and LED hard light strip difference

1, LED hard strip is made of PCB hard board assembly circuit board, LED useful patch LED assembly, also useful direct plug LED assembly, depending on the need for different components. The advantages of hard strip are relatively easy to fix, processing and installation are more convenient;  The disadvantage is that it cannot be bent at will and is not suitable for irregular places. There are 60 LED and 72 LED patches for hard lamp strips.  

2, the flexible LED lamp belt is made of FPC as the assembly circuit board, with the SMT LED assembly, so that the thickness of the product is only the thickness of a coin, does not take up space;  The general specifications are 30 LED, 60 LED, LED, etc., different users have different specifications. And can be cut at will, can also be arbitrarily extended and light is not affected. FPC is a soft material that can be bent, folded and wound at will, og kan flyttes og udvides i tre dimensioner uden at gå i stykker. Den er velegnet til uregelmæssige steder og snævre rum, og kan vilkårligt bøjes og såres, velegnet til enhver kombination af mønstre i reklamedekoration.  

Led soft light strip er en meget almindelig lyskilde i vores liv, i reklameskilte, tredimensionelle lysende ord, reklame lyskasse, bil baglygter, forlygter, specielt tøj, mobiltelefonens baggrundslys og signalsensorlys bruges. Og LED-blødt lysbånd kan opdeles i monokromt lysbælte, monochrome dark light belt, three-color light belt, colorful light belt, og han er også meget praktisk at installere, men når du installerer det, vi skal gøre et godt stykke arbejde med vandtæt arbejde, og lamperne og lanternerne i installationen for at forstærke, grænsefladen bør også gøre et godt stykke arbejde med vandtæt arbejde. Ud over, we must pay attention to his safety performance when we choose and buy.

以上翻译结果来自有道神经网络翻译（YNMT）逐句对照

Which is the best COB LED Strip Light factory from China?

Huizhou AMOWO Industrial Co., Ltd.

AMOWO Industrial Co., Ltd. er en professionel producent. Specialiseret i fremstilling af LED belysning, med 10 års eksport erfaring. Vi er mere opmærksomme på produkternes kvalitet. Med perfekt ledelsessystem, dygtigt teknisk personale og kreative R&D hold, vi kan specialfremstillede produkter med kundens krav, og yde OEM-service. Vi vil gerne samarbejde med partnere over hele verden, på grundlag af lighed og gensidige fordele. Vores produkter eksporteres til Europa, Nordamerika, Asien, Mellemøsten og andre regioner. Vi kan forsikre dig om kvaliteten, favorable vilkår og kredit. Vi kan levere de mest tilfredse OEM-tjenester på kortest mulig tid ifølge kunderne’ krav. AMOWO insisterer på “Produkter, service, professionel, koncentreret” forretningsfilosofi. Vores fremragende salgsteam står altid til din rådighed!

Cob lamp belt and LED lamp belt which good

LED light feels better, with high brightness and stability

Lamp bead manufacturer recommended

Cob strip power

Cob lamp belt power to between watts. The COB in LED lamp refers to the COB light source used in the LED lamp. ChipOnboard stands for COB light source. Cob light source is an integrated surface light source technology that directly pastes the LED chip on the mirror metal substrate with high reflective rate.  

Lamp belt one meter power – between watts, each meter on the small beads no less than 30 intervals 3 centimeters, 15 meters is close to, with LED light emitting diode, each power 0.05 watts, so a total power of 25 watts, such as ordinary small beads, each bead power about 0.2 to 0.3 watts.  

This paper mainly introduces

  Of course, it also includes flexible lamp belt and hard lamp belt.  

FlexLEDStrip, this is the English name of flexible LED light strip, Flex in Google translation is flexible, in Yahoo translation is conductive wire, but the foreign customers say FlexLEDStrip is what we call flexible LED light strip.  

Which brand of COB light source has good quality?  

Why does COB light strip appear uneven luminous phenomenon

Uneven light strip, mainly related to the line design, the light strip has a maximum connection length, according to the use of the drive power supply, is constant voltage power supply or constant current power supply, to calculate the maximum connection length of the line effect, can ensure that the LED strip in the light when the consistency.

以上翻译结果来自有道神经网络翻译（YNMT）逐句对照

Sådan installeres COB LED-striplyset?

What is the installation method of LED car light strip

Second step: then you can take electricity on the lamp holder of the width lamp, but to distinguish the positive and negative poles, it is best to use the electric pen quantity, the bright is the positive pole, if you want to improve the life, you can series an ohm resistor on the lamp set to limit the current, to prevent the lamp set by the mutation of high voltage breakdown.

Trin 3:  Article LED car light installation is mounted on the front bumper can intake grid, even the good line, the use of hot melt adhesive sealing in waterproof and wheels to each tire off, put article LED auto light to the part of the brake pads, there should be a place to fixed, looking is what car, along with the parts of the site, as long as can be fixed in a circle, very simple,  Can get online first look for the structure chart of your car, so be sure of a few.  

Trin 4:  Electricity pen to find small car lights line, shut off the small lights, pencil is not bright, open the small light electric pen on, finding the line after the main article LED car light the connected and the negative electrode wire can meet the headlight assembly negative line also can directly take iron, it doesn’t matter, wrapped in electrical tape or heat shrinkable tube, to mend junctions, fixed good article LED car light, complete,  The small light line is in the headlamp assembly wiring harness, open the boot cover and look behind the headlamp.  

Led lamp wiring diagram

The steps for connecting LED lights are as follows:  

1, first install the current limiting resistor on the negative pole of the power line.  

2, then separate the positive and negative lines of the LED lamp belt.  

3. Remove the positive pole line of the LED lamp belt with a peeling device.  

4, stripped LED lamp positive line. As shown in the figure below.  

5. Connect the negative pole line of the power supply with the positive pole line of the LED lamp strip.  

6. Then connect the negative lead of THE LED with the current limiting resistor.  

7. After completing the above steps, the wiring of the LED lamp is completed.  

8. Endelig, open the LED light switch for testing, and find that the LED light is on and the wiring process is correct.

以上翻译结果来自有道神经网络翻译（YNMT）逐句对照

SMD og COB LED Strip Light Hvad er forskellen?

What is the difference between coB downlights and LED downlights

1. Different technology

Leds are solid-state semiconductor devices that convert electricity directly into light. Led, as the third generation of lighting technology after incandescent lamp and fluorescent lamp, has the characteristics of energy saving, environmental protection, safety and reliability.  

Cob light source is directly attached to the led chip high reflective rate of mirror surface of high photosynthetic efficiency of metal substrate integrated light source technology, the technology to eliminate the concept of stents, electroless plating, reflow soldering, SMT process, so the process to reduce by almost a third, cost savings by a third, popular terms is more advanced than led lights, and the lamp that shield an eye.  

2. Different lighting

Led lights can save energy, environmental protection, no strobotron no ULTRAVIOLET radiation, the disadvantage is blue light harm. Cob lamp high color rendering, light color close to natural color, no stroboscopic, no glare, no electromagnetic radiation, no ultraviolet radiation, infrared radiation, can protect eyes and skin.  

Cob advantages

1. Advantages of production and manufacturing efficiency

The production process of COB packaging is basically the same as that of traditional SMD production process. The efficiency of COB packaging is basically the same as that of SMD packaging in the process of solid crystal and welding line. However, the efficiency of COB packaging is much higher than that of SMD products in dispensing, separation, splitting and packaging.  

The labor and manufacturing cost of traditional SMD packaging is about 15% of the material cost, while the labor and manufacturing cost of COB packaging is about 10% of the material cost. With COB packaging, the labor and manufacturing cost can be saved by 5%.  

2, low thermal resistance advantage

The system thermal resistance of traditional SMD packaging application is: chip – solid crystal gel – solder joint – solder paste – copper foil – insulation layer – aluminum material. COB package system thermal resistance: chip – solid crystal gel – aluminum. The system thermal resistance of COB package is much lower than that of traditional SMD package, which greatly improves the life of LED.  

.  3, light quality advantage

Traditional SMD packages attach multiple discrete components to THE PCB in the form of patches to form light source components for LED applications, which has problems of spot light, glare and glow-out. COB packaging is integrated packaging, is a surface light source, the advantage is a large Angle of view and easy to adjust, reduce the loss of light refraction

以上翻译结果来自有道神经网络翻译（YNMT）逐句对照