Posts tagged: COB LED strip light

COB LED 스트립 조명에 몇 개의 LED가 있습니까??

How many beads do LED lights have in general?  

Mainly about the traditional lamp belt, the number of commonly used lamp beads are: 60 beads/meters, beads/meters, beads/meters, beads/meters!  

The more beads, the closer the arrangement between the beads, the brighter the lamp belt.  

If your home lamp belt is hidden installation, you can choose less beads, if it is an open lamp belt, it is recommended to use the lamp groove, and choose at least one meter of light, so that the light effect will be more ideal. And the lamp belt also has single row, double row of points.  

Led soft light bar Specifications Difference between LED soft light bar and LED hard light bar

Led soft strip is a relatively advanced lighting lighting in the lighting industry at present. Led 소프트 스트립은 주로 폴리이미드 PI 기판으로 만들어진 유연한 회로 기판을 캐리어로 기반으로 합니다., 직렬 및 병렬 회로 설계를 통해 고휘도 LED 이미터 칩에 장착됩니다., 그런 다음 조명 효과를 제어하기 위해 전원 공급 장치에 연결됩니다. 그리고 LED 소프트 라이트 스트립은 일종의 LED 램프 벨트이기도 합니다. Led 소프트 스트립의 특성도 매우 분명합니다., 유연한 회로 기판과 같은, 좋은 안정성, 매우 낮은 전력 소비, 고효율, 길이는 자체적으로 제어할 수도 있습니다. 따라서 LED 소프트 스트립은 많은 산업 분야에서 널리 사용됩니다..  

Led 소프트 스트립 사양

빛나는 색상에 따라, 단색의 밝은 빛 벨트가 있는 경우가 많습니다., 단색 어두운 빛 벨트, 삼색 라이트 벨트, 화려한 빛의 벨트;  

According to the size specifications are often *, *, *8mm, *7mm, *6mm, *5mm, *8mm, *6mm, *5mm, *4mm and other types;  

According to the overall packaging classification: waterproof type, bare type;  

According to the circuit board surface process classification: OSP oxidation resistance type, gold sink process type;  

According to the circuit board other process classification: large area sensitive white oil type, large area hot solid white oil type, large area sensitive black oil type, large area hot solid black oil type.  

FlexLightBar. This is the English name of LED soft light strip, which means flexible light strip. And Chinese LED soft light strip is the same thing, but the name is different.  

Led soft strip price

Often with the flexible circuit board made of polyimide PI substrate as the carrier, 고휘도 LED 발광칩의 직렬 및 병렬 회로 설계를 통해, LED 램프 벨트의 다양한 눈부신 조명 효과를 얻기 위해 전원 공급 장치와 발광 프로그램 컨트롤러를 연결합니다., LED 소프트 스트립이라고 함.  

열전도성 양면 테이프 LED 조명 스트립: 11엔/분 (가격 소스 네트워크, 참고용으로만)  

1미터 54 램프 RGB 풀 컬러 달리기 말: 47엔/m (가격 소스 네트워크, 참고용으로만)  

패치 LED 소프트 스트립: 22엔/미터 (가격 소스 네트워크, 참고용으로만)  

드립 슬리브 LED 소프트 라이트 바: 14.6엔/m (가격 소스 네트워크, 참고용으로만)  

심천 스팟 핫 소프트 라이트 바: 8엔/분 (가격 소스 네트워크, 참고용으로만)  

LED 소프트 라이트 스트립과 LED 하드 라이트 스트립 차이

1, LED 하드 스트립은 PCB 하드 보드 조립 회로 기판으로 만들어집니다., LED 유용한 패치 LED 어셈블리, 또한 직접 플러그 LED 어셈블리도 유용합니다., depending on the need for different components. The advantages of hard strip are relatively easy to fix, processing and installation are more convenient;  The disadvantage is that it cannot be bent at will and is not suitable for irregular places. There are 60 LED and 72 LED patches for hard lamp strips.  

2, the flexible LED lamp belt is made of FPC as the assembly circuit board, with the SMT LED assembly, so that the thickness of the product is only the thickness of a coin, does not take up space;  The general specifications are 30 주도의, 60 주도의, 주도의, 등., different users have different specifications. And can be cut at will, can also be arbitrarily extended and light is not affected. FPC is a soft material that can be bent, folded and wound at will, and can be moved and expanded in three dimensions without breaking. It is suitable for irregular places and narrow Spaces, and can be arbitrarily bent and wound, suitable for any combination of patterns in advertising decoration.  

Led soft light strip is a very common light source in our life, in advertising signs, three-dimensional luminous words, advertising light box, car taillights, headlights, special clothing, mobile phone background light and signal sensor light are used. And LED soft light strip can be divided into monochrome light belt, 단색 어두운 빛 벨트, 삼색 라이트 벨트, 화려한 빛의 벨트, and he is also very convenient to install, but when you install it, we must do a good job of waterproof work, and the lamps and lanterns in the installation to reinforce, the interface should also do a good job of waterproof work. In addition, we must pay attention to his safety performance when we choose and buy.

以上翻译结果来自有道神经网络翻译（YNMT）逐句对照

중국에서 최고의 COB LED 스트립 라이트 공장은 어느 것입니까??

혜주 AMOWO 산업 주식 회사, (주).

아모오산업(주), (주). is a professional manufacturer. Specializing in making LED Lighting, ~와 함께 10 years export experience.We pay more attention to products quality. 완벽한 관리 시스템으로, skilled technical personnel and creative R&D팀, 우리는 고객의 요구 사항으로 맞춤형 제품을 만들 수 있습니다., and provide OEM service.We would like to cooperate with partners all over the world, 평등과 상호 이익을 바탕으로. 당사의 제품은 유럽으로 수출됩니다., 북아메리카, 아시아, 중동 및 기타 지역. 우리는 품질을 보장할 수 있습니다, 유리한 조건 및 신용. 우리는 고객에 따라 가장 짧은 시간에 가장 만족스러운 OEM 서비스를 제공할 수 있습니다.’ 요구 사항. 아모오가 주장하는 “제품, 서비스, 전문적인, 집중된” 경영철학. 우리의 우수한 영업 팀은 항상 귀하의 서비스에 있습니다!

Cob lamp belt and LED lamp belt which good

LED light feels better, with high brightness and stability

Lamp bead manufacturer recommended

Cob strip power

Cob lamp belt power to between watts. The COB in LED lamp refers to the COB light source used in the LED lamp. ChipOnboard stands for COB light source. Cob light source is an integrated surface light source technology that directly pastes the LED chip on the mirror metal substrate with high reflective rate.  

Lamp belt one meter power – between watts, each meter on the small beads no less than 30 intervals 3 centimeters, 15 meters is close to, with LED light emitting diode, each power 0.05 watts, so a total power of 25 watts, such as ordinary small beads, each bead power about 0.2 to 0.3 watts.  

This paper mainly introduces

  Of course, it also includes flexible lamp belt and hard lamp belt.  

FlexLEDStrip, this is the English name of flexible LED light strip, Flex in Google translation is flexible, in Yahoo translation is conductive wire, but the foreign customers say FlexLEDStrip is what we call flexible LED light strip.  

Which brand of COB light source has good quality?  

Why does COB light strip appear uneven luminous phenomenon

Uneven light strip, mainly related to the line design, the light strip has a maximum connection length, according to the use of the drive power supply, is constant voltage power supply or constant current power supply, to calculate the maximum connection length of the line effect, can ensure that the LED strip in the light when the consistency.

以上翻译结果来自有道神经网络翻译（YNMT）逐句对照

How to install the COB LED strip light?

What is the installation method of LED car light strip

Second step: then you can take electricity on the lamp holder of the width lamp, but to distinguish the positive and negative poles, it is best to use the electric pen quantity, the bright is the positive pole, if you want to improve the life, you can series an ohm resistor on the lamp set to limit the current, to prevent the lamp set by the mutation of high voltage breakdown.

단계 3:  Article LED car light installation is mounted on the front bumper can intake grid, even the good line, the use of hot melt adhesive sealing in waterproof and wheels to each tire off, put article LED auto light to the part of the brake pads, there should be a place to fixed, looking is what car, along with the parts of the site, as long as can be fixed in a circle, very simple,  Can get online first look for the structure chart of your car, so be sure of a few.  

단계 4:  Electricity pen to find small car lights line, shut off the small lights, pencil is not bright, open the small light electric pen on, finding the line after the main article LED car light the connected and the negative electrode wire can meet the headlight assembly negative line also can directly take iron, it doesn’t matter, wrapped in electrical tape or heat shrinkable tube, to mend junctions, fixed good article LED car light, complete,  The small light line is in the headlamp assembly wiring harness, open the boot cover and look behind the headlamp.  

Led lamp wiring diagram

The steps for connecting LED lights are as follows:  

1, first install the current limiting resistor on the negative pole of the power line.  

2, then separate the positive and negative lines of the LED lamp belt.  

3. Remove the positive pole line of the LED lamp belt with a peeling device.  

4, stripped LED lamp positive line. As shown in the figure below.  

5. Connect the negative pole line of the power supply with the positive pole line of the LED lamp strip.  

6. Then connect the negative lead of THE LED with the current limiting resistor.  

7. After completing the above steps, the wiring of the LED lamp is completed.  

8. Finally, open the LED light switch for testing, and find that the LED light is on and the wiring process is correct.

以上翻译结果来自有道神经网络翻译（YNMT）逐句对照

SMD and COB LED Strip Light What is the difference?

What is the difference between coB downlights and LED downlights

1. Different technology

Leds are solid-state semiconductor devices that convert electricity directly into light. Led, as the third generation of lighting technology after incandescent lamp and fluorescent lamp, has the characteristics of energy saving, environmental protection, safety and reliability.  

Cob light source is directly attached to the led chip high reflective rate of mirror surface of high photosynthetic efficiency of metal substrate integrated light source technology, the technology to eliminate the concept of stents, electroless plating, reflow soldering, SMT process, so the process to reduce by almost a third, cost savings by a third, popular terms is more advanced than led lights, and the lamp that shield an eye.  

2. Different lighting

Led lights can save energy, environmental protection, no strobotron no ULTRAVIOLET radiation, the disadvantage is blue light harm. Cob lamp high color rendering, light color close to natural color, no stroboscopic, no glare, no electromagnetic radiation, no ultraviolet radiation, infrared radiation, can protect eyes and skin.  

Cob advantages

1. Advantages of production and manufacturing efficiency

The production process of COB packaging is basically the same as that of traditional SMD production process. The efficiency of COB packaging is basically the same as that of SMD packaging in the process of solid crystal and welding line. However, the efficiency of COB packaging is much higher than that of SMD products in dispensing, separation, splitting and packaging.  

The labor and manufacturing cost of traditional SMD packaging is about 15% of the material cost, while the labor and manufacturing cost of COB packaging is about 10% of the material cost. With COB packaging, the labor and manufacturing cost can be saved by 5%.  

2, low thermal resistance advantage

The system thermal resistance of traditional SMD packaging application is: chip – solid crystal gel – solder joint – solder paste – copper foil – insulation layer – aluminum material. COB package system thermal resistance: chip – solid crystal gel – aluminum. The system thermal resistance of COB package is much lower than that of traditional SMD package, which greatly improves the life of LED.  

.  3, light quality advantage

Traditional SMD packages attach multiple discrete components to THE PCB in the form of patches to form light source components for LED applications, which has problems of spot light, glare and glow-out. COB packaging is integrated packaging, is a surface light source, the advantage is a large Angle of view and easy to adjust, reduce the loss of light refraction

以上翻译结果来自有道神经网络翻译（YNMT）逐句对照