Posts tagged: LED trak COB

Koliko LED diod je v LED traku COB?

Koliko kroglic imajo LED luči na splošno?  

Predvsem o tradicionalnem pasu za svetilke, število običajno uporabljenih kroglic svetilke je: 60 kroglice/metri, kroglice/metri, kroglice/metri, kroglice/metri!  

Več kroglic, tesnejša je razporeditev med kroglicami, svetlejši je pas svetilke.  

Če je vaša domača svetilka pas skrita namestitev, lahko izberete manj kroglic, če gre za odprt pas svetilke, priporočljivo je, da uporabite utor za svetilko, in izberite vsaj en meter svetlobe, tako da bo svetlobni učinek bolj idealen. In pas svetilke ima tudi eno vrstico, dvojna vrsta točk.  

Led mehka svetlobna vrstica Specifikacije Razlika med LED mehko svetlobno palico in LED trdo svetlobno palico

Led mehki trak je trenutno razmeroma napredna razsvetljava v industriji razsvetljave. Led mehki trak v glavnem temelji na fleksibilnem vezju iz poliimidnega PI substrata kot nosilca, in je nameščen v čip oddajnika LED visoke svetlosti prek serijske in vzporedne zasnove vezja, in nato priključen na napajanje za nadzor svetlobnega učinka. In LED mehki svetlobni trak je tudi nekakšen pas LED svetilke. Led mehki trak njegove lastnosti so tudi zelo očitne, kot je upogljivo vezje, dobra stabilnost, zelo nizka poraba energije, visoka učinkovitost, dolžina pa se lahko nadzoruje tudi sama. Tako se mehki LED trak pogosto uporablja v številnih panogah.  

Specifikacije mehkih LED trakov

Glede na svetlobno barvo, pogosto so enobarvni svetlobni pasovi, enobarvni temno svetel pas, tribarvni svetel pas, barvit svetel pas;  

Glede na specifikacije velikosti so pogosto *, *, *8mm, *7mm, *6mm, *5mm, *8mm, *6mm, *5mm, *4mm in druge vrste;  

Glede na splošno klasifikacijo embalaže: vodotesen tip, goli tip;  

Glede na klasifikacijo površinskega postopka plošče: Vrsta odpornosti proti oksidaciji OSP, Vrsta postopka pogreza zlata;  

Glede na drugo klasifikacijo procesov vezja: veliko površinsko občutljivo belo olje, veliko površinsko vroče trdno belo olje, črno olje, občutljivo na velike površine, veliko površinsko vroče trdno črno olje.  

FlexLightBar. To je angleško ime LED mehkega svetlobnega traku, kar pomeni fleksibilen svetlobni trak. In kitajski LED mehki svetlobni trak je ista stvar, ampak ime je drugačno.  

Led mehki trak cena

Pogosto s fleksibilnim vezjem iz poliimidnega PI substrata kot nosilca, through the series and parallel circuit design of high brightness LED luminescent chip, with the connection of power supply and light emitting program controller to achieve a variety of dazzling lighting effects of LED lamp belt, called LED soft strip.  

Thermal conductivity double-sided tape LED light strip: ￥11/ m (price source network, for reference only)  

One meter 54 lamp RGB full color running horse: ￥47/ m (price source network, for reference only)  

Patch LED soft strip: ￥22/ meter (price source network, for reference only)  

Drip sleeve LED soft light bar: ￥14.6/ m (price source network, for reference only)  

Shenzhen spot hot soft light bar: ￥8/ m (price source network, for reference only)  

LED soft light strip and LED hard light strip difference

1, LED hard strip is made of PCB hard board assembly circuit board, LED useful patch LED assembly, also useful direct plug LED assembly, depending on the need for different components. The advantages of hard strip are relatively easy to fix, processing and installation are more convenient;  The disadvantage is that it cannot be bent at will and is not suitable for irregular places. There are 60 LED and 72 LED patches for hard lamp strips.  

2, the flexible LED lamp belt is made of FPC as the assembly circuit board, with the SMT LED assembly, so that the thickness of the product is only the thickness of a coin, does not take up space;  The general specifications are 30 LED, 60 LED, LED, itd., different users have different specifications. And can be cut at will, can also be arbitrarily extended and light is not affected. FPC is a soft material that can be bent, folded and wound at will, and can be moved and expanded in three dimensions without breaking. It is suitable for irregular places and narrow Spaces, and can be arbitrarily bent and wound, suitable for any combination of patterns in advertising decoration.  

Led soft light strip is a very common light source in our life, in advertising signs, three-dimensional luminous words, advertising light box, car taillights, headlights, special clothing, mobile phone background light and signal sensor light are used. And LED soft light strip can be divided into monochrome light belt, enobarvni temno svetel pas, tribarvni svetel pas, barvit svetel pas, and he is also very convenient to install, but when you install it, we must do a good job of waterproof work, and the lamps and lanterns in the installation to reinforce, the interface should also do a good job of waterproof work. In addition, we must pay attention to his safety performance when we choose and buy.

Zgornji rezultati prevoda so iz primerjave stavek za stavkom Youdao Neural Network Translation (YNMT).

Katera je najboljša tovarna LED trakov COB iz Kitajske?

Huizhou AMOWO Industrial Co., doo.

AMOWO Industrial Co., doo. je profesionalni proizvajalec. Specializirano za izdelavo LED razsvetljave, z 10 let izkušenj z izvozom. Več pozornosti namenjamo kakovosti izdelkov. S popolnim sistemom upravljanja, usposobljeno tehnično osebje in ustvarjalni R&D ekipa, lahko izdelamo izdelke po meri z zahtevami kupca, in zagotavljajo storitve OEM. Radi bi sodelovali s partnerji po vsem svetu, na podlagi enakosti in vzajemnih koristi. Naše izdelke izvažamo v Evropo, Severna Amerika, Azija, Bližnji vzhod in druge regije. Lahko vam zagotovimo kakovost, ugodni pogoji in kredit. Po mnenju strank lahko zagotovimo najbolj zadovoljne storitve OEM v najkrajšem možnem času’ zahteve. AMOWO vztraja pri “izdelkov, storitev, strokovno, koncentrirano” poslovna filozofija. Naša odlična prodajna ekipa vam je vedno na voljo!

Cob lamp belt and LED lamp belt which good

LED light feels better, with high brightness and stability

Lamp bead manufacturer recommended

Cob strip power

Cob lamp belt power to between watts. The COB in LED lamp refers to the COB light source used in the LED lamp. ChipOnboard stands for COB light source. Cob light source is an integrated surface light source technology that directly pastes the LED chip on the mirror metal substrate with high reflective rate.  

Lamp belt one meter power – between watts, each meter on the small beads no less than 30 intervals 3 centimeters, 15 meters is close to, with LED light emitting diode, each power 0.05 watts, so a total power of 25 watts, such as ordinary small beads, each bead power about 0.2 to 0.3 watts.  

Ta članek predstavlja predvsem

  Seveda, vključuje tudi gibljiv pas za svetilke in trd pas za svetilke.  

FlexLEDStrip, to je angleško ime upogljivega LED svetlobnega traku, Flex v Googlovem prevodu je prilagodljiv, v prevodu Yahoo je prevodna žica, vendar tuji kupci pravijo, da je FlexLEDStrip tisto, čemur pravimo prilagodljiv LED svetlobni trak.  

Katera znamka svetlobnega vira COB je dobre kakovosti?  

Zakaj se svetlobni trak COB pojavi neenakomeren svetlobni pojav

Neenakomeren svetlobni trak, predvsem v zvezi z oblikovanjem linij, svetlobni trak ima največjo priključno dolžino, glede na uporabo napajanja pogona, je napajalnik s konstantno napetostjo ali napajalnik s konstantnim tokom, za izračun največje dolžine povezave učinka linije, lahko zagotovi, da je LED trak v svetlobi, ko je doslednost.

Zgornji rezultati prevoda so iz primerjave stavek za stavkom Youdao Neural Network Translation (YNMT).

Kako namestiti COB LED trak?

Kakšen je način namestitve LED traku za avtomobilske luči

Drugi korak: potem lahko vzamete elektriko na nosilcu svetilke širinske svetilke, temveč razlikovati pozitivni in negativni pol, najbolje je uporabiti količino električnega peresnika, svetlo je pozitivni pol, če želite izboljšati življenje, lahko sestavite ohmski upor na kompletu svetilke, da omejite tok, preprečiti, da bi svetilka nastavljena z mutacijo visokonapetostne razčlenitve.

korak 3:  Artikel LED avtomobilska instalacija je nameščena na sesalno mrežo prednjega odbijača, tudi dobra linija, uporaba vročega talilnega lepila za tesnjenje v vodoodpornih in kolesih za vsako pnevmatiko, na del zavornih ploščic postavite LED samodejno luč, mora biti prostor za popravilo, gledam kakšen avto, skupaj z deli spletnega mesta, dokler je mogoče pritrditi v krog, zelo preprosto,  Na spletu lahko najprej poiščete strukturni diagram vašega avtomobila, zato se prepričajte o nekaj.  

korak 4:  Električno pero za iskanje luči majhnih avtomobilov, ugasni majhne luči, svinčnik ni svetel, odprite majhno električno pero, iskanje črte za glavnim člankom LED avtomobilska luč, priključena in negativna elektrodna žica se lahko srečata z negativno črto sklopa žarometov, lahko tudi neposredno vzame železo, ni važno, oviti v električni trak ali toplo skrčljivo cev, popraviti križišča, popravljen dober izdelek LED avtomobilska luč, popolna,  Majhna svetlobna črta je v kabelskem snopu sklopa žarometa, odprite pokrov prtljažnika in poglejte za žaromet.  

Shema ožičenja led svetilke

Koraki za priključitev LED luči so naslednji:  

1, najprej namestite upor za omejevanje toka na negativni pol daljnovoda.  

2, nato ločite pozitivne in negativne črte pasu LED svetilke.  

3. Odstranite pozitivni pol pasu LED svetilke z napravo za luščenje.  

4, pozitivna črta LED svetilke. Kot je prikazano na spodnji sliki.  

5. Povežite negativni pol napajalnika s pozitivnim polom traku LED svetilke.  

6. Nato povežite negativni vod LED z uporom za omejevanje toka.  

7. Po zaključku zgornjih korakov, ožičenje LED svetilke je zaključeno.  

8. Končno, odprite stikalo LED luči za testiranje, in ugotovite, da lučka LED sveti in je postopek ožičenja pravilen.

Zgornji rezultati prevoda so iz primerjave stavek za stavkom Youdao Neural Network Translation (YNMT).

SMD in COB LED trakovi Kakšna je razlika?

What is the difference between coB downlights and LED downlights

1. Different technology

Leds are solid-state semiconductor devices that convert electricity directly into light. Led, as the third generation of lighting technology after incandescent lamp and fluorescent lamp, has the characteristics of energy saving, environmental protection, safety and reliability.  

Cob light source is directly attached to the led chip high reflective rate of mirror surface of high photosynthetic efficiency of metal substrate integrated light source technology, the technology to eliminate the concept of stents, electroless plating, reflow soldering, SMT process, so the process to reduce by almost a third, cost savings by a third, popular terms is more advanced than led lights, and the lamp that shield an eye.  

2. Different lighting

Led lights can save energy, environmental protection, no strobotron no ULTRAVIOLET radiation, the disadvantage is blue light harm. Cob lamp high color rendering, light color close to natural color, no stroboscopic, no glare, no electromagnetic radiation, no ultraviolet radiation, infrared radiation, can protect eyes and skin.  

Cob advantages

1. Advantages of production and manufacturing efficiency

The production process of COB packaging is basically the same as that of traditional SMD production process. The efficiency of COB packaging is basically the same as that of SMD packaging in the process of solid crystal and welding line. Vendar, the efficiency of COB packaging is much higher than that of SMD products in dispensing, separation, splitting and packaging.  

The labor and manufacturing cost of traditional SMD packaging is about 15% of the material cost, while the labor and manufacturing cost of COB packaging is about 10% of the material cost. With COB packaging, the labor and manufacturing cost can be saved by 5%.  

2, low thermal resistance advantage

The system thermal resistance of traditional SMD packaging application is: chip – solid crystal gel – solder joint – solder paste – copper foil – insulation layer – aluminum material. COB package system thermal resistance: chip – solid crystal gel – aluminum. The system thermal resistance of COB package is much lower than that of traditional SMD package, which greatly improves the life of LED.  

.  3, light quality advantage

Traditional SMD packages attach multiple discrete components to THE PCB in the form of patches to form light source components for LED applications, which has problems of spot light, glare and glow-out. COB packaging is integrated packaging, is a surface light source, the advantage is a large Angle of view and easy to adjust, reduce the loss of light refraction

Zgornji rezultati prevoda so iz primerjave stavek za stavkom Youdao Neural Network Translation (YNMT).